Cationic Polyacrylamide Powder for Oil Refinery

Cationic polyacrylamide powder is used widely at oil refinery, Oil refineries usually use emulsion breaker for primary oil-water separation. The separated sewage requires cationic polyacrylamide powder to remove residual oil from DAF and API units

Cationic polyacrylamide powder can produce a higher affinity for oil, so the use of cationic polyacrylamide powder in DAF can achieve better oil-water separation effect, cationic polyacrylamide powder can also remove heavy metals in sewage, so that the treated Sludge can be returned to the refining process as waste oil or coking machine.

Our cationic polyacrylamide powder is widely used in domestic and international large Oil refineries，it has the characteristics of saving materials, high efficiency and stable product quality.

Specification:

Usage:

1. The cationic polyacrylamide powder cannot be directly added to the sewage. It must be dissolved in water before use, and its aqueous solution is used to treat sewage.

2. The water for dissolving the granular polymer should be clean (such as tap water), not sewage. Normal temperature water is sufficient, and generally does not need to be heated. Water temperature lower than 5℃ is very slow to dissolve. Increasing the water temperature will speed up the dissolution rate, but above 40℃ will accelerate the degradation of the polymer and affect the use effect. Generally, tap water is suitable for preparing polymer solutions. Strong acid, strong alkali, and high salt water are not suitable for preparation.

3. Polyacrylamide is strictly prohibited from contact with iron, iron ions will degrade the molecular chain of polyacrylamide.

4. The concentration of polymer solution is recommended to be 0.1%-0.3%, that is, 1g-3g polymer powder is added to 1 liter of water. Packaging: 25 kg per PE valve bag, 36 bags on pallet, 20 pallets in a 20’FCL, private labeling and customized packaging is also available on request.

http://www.oubochemical.com/